What you need to know about changing a shower faucet seat

With the accumulation of scale, the seat of a shower faucet may stop working. It is advisable to replace it, but there are a few things you need to make sure of before doing so. Read the following lines of this article to know these things.

The procedure for checking the condition of the seals

Before changing the seat of your faucet, you should always first make sure that it is no longer in the best condition. So to make sure that it is no longer in good condition, some checks are necessary to be carried out to be link to solutions. Even if you have noticed that the seat is leaky, it is possible that it is defective or not. So, to make sure of this, you should first close the sink drain so that the screws are not lost. Once this is done, open the handle of the tap to gain access to the seals. Also, unscrew the handle and the crosspiece to make it easier to remove the handle. Finally, unscrew the head of the tap and if you see any cracks, it means that the seat needs to be replaced. 

How do you replace a seat ?

Firstly, turn off the water supply. This will prevent water from running all over the place while you are working. Next, open the tap to drain any remaining water from the pipes. Then unscrew the base of the tap head. With the help of an adjustable or open-end spanner, you can loosen and remove the moving part of the shower faucet. Once this is done, you can remove the seal. The next step is to clean the area where the new faucet seat will be installed. After cleaning, now install the new faucet seat while checking that everything is working properly. Finally, turn on the water supply and let the liquid flow through the tap.